Number Inertia of DimensionsModel Model of Thermal Rotating XStandard Enclosed Rotating Torque Capacity Parts C AC1-Piece 2-PieceHousing Housing Discs
10Figure 10
REPLACEMENT PARTS LISTItem No. Description Std. Housing 6-60000-551 Encl. Housing 4-60000-553 Qty. Item No. Description Std. Housing 6-60000-551 En
SPECIFICATIONSTorque: 1-1/2 through 20 lb. ft.NEMA Motor Frame Sizes: 56C, 143TC, and 145TC.Enclosure: Aluminum with steel wrap coverVoltage: All NEMA
WARNING:Brake performance and features must be carefullymatched to the requirements of the application. Consideration must be given to torque requirem
For models with one-piece shaft design:1. Place 3/16” square key furnished into motor keyway.Key must extend to, and be flush with, end of motorshaft.
4MAINTENANCECaution: Before attempting to service or remove any components, make certain that the power is disconnectedand that the load is completely
Torque AdjustmentCaution: Load to be removed or blocked. Brake may beinoperative during this procedure.The magnetic disc brake is factory set for rate
Armature Plate Assembly ReplacementCaution: Load to be removed or blocked. Brake will be inop-erative during this procedure.Refer to Figs. 3, 6 and 10
7Manual Release AssemblyRefer to Fig. 7.1. Adapter housing (7) must be removed to replace manualrelease assembly. Remove adapter housing (7) per“Frict
VERTICAL MOUNTINGInstallation and AdjustmentInstallation and adjustment of the vertically mounted brakeis the same as on the standard model.Friction D
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTIONBrake does not release 1. Broken or damaged parts 1. Replace.2. Wrong voltage 2. Check for correct voltage. Vo
Kommentare zu diesen Handbüchern